Directions to Parsippany Office
Multispectral Imaging’s (MII)
Parsippany offices are located very near to the intersection of
Interstates 80 and 287. Visitor parking is in front of the
building and MII’s offices are on the 1st floor.
From New York City and Points East via
Interstate 80 West
1. I-80 West is accessible via Exit 70 from the New Jersey Turnpike.
2. Take I-80 West approximately 20 miles from Turnpike.
3. Approaching Parsippany stay right and take Exit 43 for I-287.
4. Merge onto two-lane highway paralleling I-80, stay right, and
take Exit 43b for I-287N/Smith Rd./US Route
46/Mahwah.
5. Continue to stay as far right as possible and take ramp for US
Route 46/Smith Rd. down to 'T' at Littleton Road.
6. Make a left onto Littleton Rd. to traffic light at Parsippany
Blvd.
7. Make a left onto Parsippany Blvd., cross over I-80, to next
traffic light at Lanidex Plaza.
8. Make a left into plaza, then first right onto Misty Lane and park
in a visitor parking spot in front of the building.
9. Multispectral Imaging’s offices are on the 1st floor.
From Pennsylvania and Points West via
Interstate 80
1. East I-80 East to exit 42A-C for US Route 202.
2. Merge onto one-lane road paralleling I-80 East.
3. Take Exit 42C for US Route 202 North/Littleton Rd.
4. Merge onto US Route 202 North/Littleton Rd. to next traffic light
at Parsippany Blvd.
5. Make a right on Parsippany Blvd., cross over I-80, to next
traffic light at Lanidex Plaza.
6. Make a left into plaza, then first right onto Misty Lane and park
in a visitor parking spot in front of the building.
7. Multispectral Imaging’s offices are on the 1st floor.
From New Jersey and Points South via
Interstate 287
1. North I-287 North is accessible via Exit 10 from the New Jersey
Turnpike, as well as via US Route 206 North
from Philadelphia/Trenton area, and US Route 202 North from
West Philadelphia/Valley Forge Area.
2. US Route 206 North is accessible via I-95 North from
Philadelphia/Wilmington area.
3. Take I-287 North to Exit 40 for Parsippany Blvd./Route 511 North.
4. After exiting stay left to traffic light at Parsippany
Blvd./Route 511 North.
5. Make left at light onto Parsippany Blvd./Route 511 North.
6. Proceed through Lake Parsippany business district to light at
Lanidex Plaza (Chase Manhattan Bank branch on
right immediately before light).
7. Make a right into the plaza, then first right onto Misty Lane and
park in a visitor parking spot in front of the
building.
8. Multispectral Imaging’s offices are on the 1st floor.
From New York State and Points North via
Interstate 287
1. South I-287 South is accessible from New York State via I-87
South, or I-87 North via the Tappan Zee Bridge.
2. Take I-287 South approximately 30 miles from New York border to
Parsippany.
3. Take Exit 40a for Parsippany Blvd./Route 511 North.
4. Follow ramp to right to merge onto Parsippany Blvd./Route 511
North. Proceed through Lake Parsippany
business district to light at Lanidex Plaza (Chase Manhattan
Bank branch on right immediately before light).
5. Make a right into the plaza, then first right onto Misty Lane and
park in a visitor parking spot in front of the
building.
6. Multispectral Imaging’s offices are on the 1st floor.
From Newark Liberty International Airport
1. When exiting airport follow signs for I-78 West.
2. Stay right on I-78 local lanes and take exit ramp for Route 24
West for Morristown.
3. Take Route 24 West to termination of highway at I-287.
4. Take ramp for I-287 North.
5. Follow directions above for Interstate 287 North.
|
Click Map
to go to Mapquest for larger image |
Back to Top
Directions to Oak Ridge Office
Multispectral Imaging’s Oak Ridge office
is located in the Tech 2020 building in, Commerce Park, Oak Ridge,
TN.
From Oak Ridge
1. From Illinois Avenue, veer right onto Scarboro Road.
2. Go past the Y-12 Plant entrance (on the right) and the red brick
building on the left.
3. Go over the hill and take the next left into Commerce Park.
4. At the stop sign, take a right onto Commerce Park Drive.
5. Technology 2020 is the second building, the first driveway on the
right.
6. Multispectral Imaging’s offices are in Suite A of the Tech 2020
building.
From Knoxville
1. Traveling on I-40/I-75, take the Oak Ridge exit #376 onto 162N.
2. After going 5.4 miles on 162N, 162N becomes 62W. Follow signage
"To Oak Ridge".
3. After crossing the Clinch River bridge, you will see a "Welcome
to Oak Ridge" sign.
4. Stay in the left lane. You will cross over a fly over bridge.
5. Immediately after crossing over the bridge, you will see a left
turn lane.
6. Turn left into Commerce Park.
7. After turning into Commerce Park, take the 1st left. (This is
also Commerce Park Drive as it makes a large circle
around the park.)
8. Technology 2020 is the 2nd building on the left.
9. Multispectral Imaging’s offices are in Suite A of the Tech 2020
building.
From McGhee Tyson Airport
1. Take Alcoa Hwy (129N) toward Knoxville.
2. At 2.9 miles, take the Oak Ridge exit onto I-140W (Pellissippi
Parkway).
3. Go approximately 11.7 miles. You will go over I-40/I-75. Follow
signage "To Oak Ridge".
4. After going 5.4 miles on 162N, 162N becomes 62W. Follow signage
"To Oak Ridge".
5. Follow directions from Step 2 "From Knoxville."
From Chattanooga (distance 109.1 miles)
1. Traveling North on I-24, I-24 becomes I-75N.
2. Travel I-75N to Knoxville and take the I-40E exit and merge onto
I-40E.
3. Traveling East on I-40, follow I-40 signage to Knoxville.
4. Take the Oak Ridge exit #376 (East/Oak Ridge - North/Maryville).
5. Turn left, crossing over I-40.
6. Turn left at stop light onto 162N.
7. Follow directions from Step 2 "From Knoxville."
From Nashville (distance 169.3 miles)
1. Traveling East on I-40, follow I-40 signage to Knoxville.
2. Take the Oak Ridge exit #376 (East/Oak Ridge - North/Maryville).
3. Turn left, crossing over I-40.
4. Turn left at stop light onto 162N.
5. Follow directions from Step 2 "From Knoxville."
|
Click Map
to go to Mapquest for larger image |
Back to Top
|
